1-5/8" x .085 x 21' Galvanized Commercial CR20 Swedged End Pipe for Chain Link Fences AFC-003-Sandstone

1-5/8" x .085 x 21' Galvanized Commercial CR20 Swedged End Pipe for Chain Link Fences AFC-003-SandstoneThis is a 1 5 8" O. D. by . 085" thick by 21' long galvanized commercial cold rolled 20 weight swedged end pipe. This particular pipe is the first grade of commercial thickness and is usually used as top rail for commercial chain link fences. We also use these to make commercial single swing and double drive gates! Due to its length, this can only be shipped via flatbed. 1 5 8" nominal & actual O. D. . 085" wall thickness Cold rolled 20 weight Swedged

Once you reach a terminal post you will need to tighten the barbed wire by placing three additional 1-5/8” end bands on the extended terminal post

These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers

This barbed wire arm features black vinyl coating

you will need double the amount

you will need (3) 2-1/2” tension bands

top tension wire

How the part fits

which will reduce your shipping costs

LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam

This is a Residential Fork Latch 1-3/8"

if you have a 4’ fence you will need (3) 2” square tension bands per terminal post

myQ® Technology enables you to securely control and monitor your gate operator from anywhere