Baldor L3515T 2HP, 3450RPM, 1PH, 60HZ, 145T, 3535L, TEFC, F1 Totally Enclosed Air Over

Baldor L3515T 2HP, 3450RPM, 1PH, 60HZ, 145T, 3535L, TEFC, F1 Totally Enclosed Air OverSpecs Catalog Number L3515T Enclosure TEFC Frame 145T Frame Material Steel Frequency 60. 00 Hz Motor Letter Type Cap Start, Induction Run Output @ Frequency 2. 000 HP @ 60 HZ Phase 1 Synchronous Speed @ Frequency 3600 RPM @ 60 HZ Voltage @ Frequency 230. 0 V @ 60 HZ 115. 0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CSA UR Ambient Temperature 40 C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base

0 V Design Code B Drip Cover No Drip Cover Duty Rating CONT Electrically Isolated Bearing Not Electrically Isolated Feedback Device NO FEEDBACK High Voltage Full Load Amps 5

50 A Rated torque 17

625 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Speed 1425 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding Normally Closed Thermostat Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T3C Drawings

14 LOCKED ROTOR TORQUE UOM OZFT INSULATION CLASS B KVA CODE LETTER G LOCKED ROTOR AMPS 50

Standard NEMA MG-1 Frequency 60//50 Hz Voltage 230/460//190-220/380-415 V Number of poles 6 Synchronous speed 1200 rpm Output rating 3 HP Mounting W-6 Flange C Terminal box¹ Left position Enclosure IC01 - ODP

7 kW) Number of Poles 4 Frequency 50 Hz Rated speed 1435 rpm Slip 4

0 Ways quantity 9 ways Rated voltage Voltage up to 80 V Certification Without

35E012G069G1 HP

2 LB-FT Starting Current 116 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

15 RATING 40C AMB-CONT FRAME 56J USABLE AT 208V N/A BLANK NEMA MG-1 PART 5

24 A Rated torque 26

8 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3526M Mounting Arrangement F1 Number of Poles 6 Overall Length 11