Bando TL44-S8M-60 STS TL Timing Belt Pulley (2012) EXPLOSION PROOF

Bando TL44-S8M-60 STS TL Timing Belt Pulley (2012) EXPLOSION PROOFBando TL44 S8M 60 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance

23 LB-FT Starting Current 125 A Full Load Torque 0 LB-FT No-Load Current 0 A Line-Line Res

Catalog Number EL3608T Enclosure TEFC Frame 184T Frame Material Steel Frequency 60

57 IN Power Factor 81 Product Family Wash Down All Stainless Steel Pulley End Bearing Type Sealed Bearing Pulley Face Code C-Face Pulley Shaft Indicator Standard Rodent Screen None RoHS Status ROHS COMPLIANT Service Factor 1

Number of Teeth115

Bando - TB134 timing belts are designed and built to provide the positive

148 Ohms A Ph / 0 Ohms B Ph Temp

5 POLES 4 NUMBER SPEEDS 1 RPM 1780 HERTZ 60 VOLTS PRIMARY 460 VOLTS 460 FRME 256 SHAFT CODE U MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE JDE OPPOSITE END BEARING 45BC02JPP3 SHAFT END BEARING 45BC03JPP3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1

9 Ohms A Ph / 0 Ohms B Ph Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

Number of Teeth453

6 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 18 AWG Motor Type 3528M Mounting Arrangement F1 Number of Poles 4 8 Overall Length 12

276 kg / 2

3x(Code H) No load current 53