Strat Big Apple/U.S. Dbl. Fat - Solid Shiny Black .090" / 2.29mm thick, with bevelled edge Strat

Strat Big Apple/U.S. Dbl. Fat - Solid Shiny Black .090" / 2.29mm thick, with bevelled edge StratThis pickguard will fit both the U. S. A Double Fat Fender Stratocaster and the Big Apple Fender Stratocaster. It will not fit Squier or any Fender Stratocaster from Korea, Indonesia, Japan or China. Please note that the pickup cutouts have rounded corners and therefore will only accommodate open bobbin Humbuckers that are without pickup covers. We can also supply this same pickguard with two Humbucker slots that will be big enough to accept covered

adding a touch of retro charm

Made from 3 ply shiny black / white / black plastic material

This pickguard is made to fit the Fender 5 String American Professional Precision Bass Made from 5 ply black/white/black/white/black PVC plastic material

For guitars with carved top

These controls can be mounted to the instrument's pickguard

helping to reduce the risk of wire breakage

ALNICO V / D

voiced with a slightly hotter wind to enhance presence and clarity

A clear protective film is left on the top of the guard to protect it during installation on the guitar

Adaptor bushing set for use in converting a modern 10mm drilled headstock to accept vintage Kluson-stamped steel tuning machines with the metric 6mm string post diameter used specifically between 1995 and 2006

385 Approx In 1 11/16 1/8 7/32 1 3/8 Millimeters

If your headstock is drilled out to 10mm then you will need to also order a set of the Gotoh adapter bushes