Arbor #3MT Suits 3/4in Shank Cutters Max. DOC 50mm

Arbor #3MT Suits 3/4in Shank Cutters Max. DOC 50mmThese arbors are designed to adapt conventional machines eg. drill presses lathes milling machines and others to acceptHolemaker annular cutters. This becomes a very economicalalternative to normal methods of drilling or boring largediameter or deep holes. By adding an extension arbor andlong series annular cutter to your industrial arbor you canachieve depths of up to 320mm in hollow section steel. Timesavings in excess of 40% over normal drilling

Description• 1/2 x 3• UNC• Zinc Plated• HIGH TENSILE GRADE 5

RemarksT7363489

• Pump outlet is fitted with an Air Vent Cap which whenloosened breaks the Siphon action

C124-2 | Champion Nylon Cable P-Clamp 6

Description• Nitrile 70 Shore• Pack Size: 5

CA90 | Champion 91pc Blanking Grommet Assortment

Capacity - 160mmLength - 230mm

• Drive: 3/8 inch• Length: 250mm

940172 | Teng 3/4in Dr

• Diameter: 54mm (2-1/8 )• Thread: 5/8

Pack Qty C63-1 1/8 x 9/32 x 7/16 8C63-2 3/16 x 5/16 x 7/16 8C63-3 1/4 x 1/2 x 9/16 8C63-4 5/16 x 17/32 x 3/4 8C63-5 3/8 x 1/2 x 11/16 8C63-6 3/8 x 9/16 x 11/16 8C63-7 3/8 x 3/4 x 1 8C63-8 7/16 x 3/4 x 1 8C63-9 1/2 x 21/32 x 13/16 8C63-10 5/8 x 1 x 1-1/8 5C63-11 3/4 x 15/16 x 1-5/16 3C63-12 29/32 x 1-1/4 x 1-1/2 3

Description• M8 x 80mm• METRIC• Zinc Plated• HIGH TENSILE GRADE 8