Suction Pressure Regulator, SDR 500, PVC/EPDM, C/W Wall Mount EASYPRO SMART

Suction Pressure Regulator, SDR 500, PVC/EPDM, C/W Wall Mount EASYPRO SMARTConstant suction pressure and leak protection The suction pressure regulator is a spring loaded diaphragm valve that is opened by the effect of the pump suction pressure. This ensures that medium is not able to flow if the pump is not running or is unable to generate a vacuum due to a line fracture. Protects the dosing pump against too high a supply pressure from a high container or feed from pressure lines Application as a container leak protection

Ceramic/Ceramic/FPM (DN3)

4571/FPM for dosing pumps up to 7 L/H

LP Size 2 and 4

LP Size 5 & 10

or via a 0/4 - 20 mA signal

Pressure relief function

A full range of dose pump accessory kits are available to ensure each dose pump operates at maximum safety and efficiency

the optional Ethernet MODBUS version integrates seamlessly into your existing automation setup

Note: limits may need adjustment according to site conditions including

5% hypo) with secondary disinfection

Operational costs are also low thanks to the use of quality sensors

Add either a low level input to turn the pump off if you run out of product to dose or use this input to trigger a stop/start