Bando 4B64 Power King Combo Feed AugerBando 4B64 To resolve problem applications where belts are flipping over or jumping out of the sheaves, utilize Bandos series of Combo belts. The tie band assures lateral rigidity and guides the belts into the sheave grooves. The tie band, reinforced with high strength transverse tensile cords, is fully oil and heat resistant and permanently welds the individual belts together. Combos utilize the premium quality Power King and Power Ace belts, with
Model_Number K055KMW0212011B PRODUCT NAME
1 POLES 4 NUMBER SPEEDS 1 RPM 1750 RPM 2 1750 HERTZ 60 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 FRME 145 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F2 MOTOR TYPE DE OPPOSITE END BEARING 6203-2Z-J/C3 SHAFT END BEARING 6205-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1
Amperes 263 A LRC 6
6 % Electrically Isolated Bearing Not Electrically Isolated Feedback Device NO FEEDBACK High Voltage Full Load Amps 37
lb Locked rotor torque 229 % Breakdown torque 240 % Locked rotor time 34s (cold) 19s (hot) Moment of inertia (J) 0
Amperage4/2
25 kW) Number of Poles 2 Frequency 60 Hz Rated speed 3520 rpm Slip 2
Bando - 100-DS3M-417 Synchro-Link® Double Sided Timing Belts provide smooth
125 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Speed 1770 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals NEMA_PREMIUM UR CSA EEV CSA Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 11
459 Line Amps 0
16 A Number of poles 3 Short-circuit release 13 x Iemax Rated operational voltage Ue 690 V Rated operational frequency 50/60 Hz Rated insulation voltage Ui 690 V Rated impulse withstand voltage Uimp 6 kV Utilization category - IEC60947-2 (motor starter protector/circuit breaker) A Utilization category - IEC60947-4-1 (Motor Starters) AC-3 Trip test Yes Overload protection Yes Phase failure sensitivity Yes Trip indication No Tripping class 10 Maximum operating frequency (ops
