Fasco D167 Fan and Blower Motor, 1/70 HP, 1 Ph, 60 Hz, 115 V, 1500 RPM, 1 Speed, 3.3" Diameter, OAO General Industrial

Fasco D167 Fan and Blower Motor, 1/70 HP, 1 Ph, 60 Hz, 115 V, 1500 RPM, 1 Speed, 3.3" Diameter, OAO General IndustrialGeneral Purpose Motor 3. 3" Diameter Shaded Pole Thermally Protected Enclosed Shaft End End Frame, Open Lead End End Frame, Semi Enclosed Shell, Air Over Class B Insulation, 40C Ambient Sleeve Bearing 1 4" Diameter Shaft with Flat 12" Leads Extended Studs Shaft End and Lead End Additional Information Thermal ProtectionThermally Protected Speed1500 rpm Current0. 70 A Number of Speeds1 Ambient Temperature40 C ULRecognized Insulation ClassB CSAY Weight2.

19 IN Power Factor 86 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code C-Face Pulley Shaft Indicator Tapped & Key Rodent Screen Included RoHS Status ROHS COMPLIANT Service Factor 1

4x(Code F) No load current 2

3 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code G Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 14 AWG Motor Type 0730M Mounting Arrangement F1 Number of Poles 2 Overall Length 19

OC3050F09SP CAPACITOR 50 MFD 370 VAC 34EP3204A01SP FR ENDPLATE

8 a Front Face Code Terminal Panel Front Shaft Indicator None Heater Indicator No Heater Insulation Class B Inverter Code Not Inverter KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Terminal Panel Or Lead Hole Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3528M Mounting Arrangement F1 Number of Poles 2 Overall Length 12

Output HP1/65 Hp

34A51-255 HP

34 LB-FT Starting Current 14

25 IN Power Factor 89 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code C-Face Pulley Shaft Indicator Tapped & Key Rodent Screen Included Service Factor 1

9 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code L Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3520M Mounting Arrangement F1 Number of Poles 2 Overall Length 15

0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CCSAUSEEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Constant Torque Speed Range 6-60 Current @ Voltage 140

Standard NEMA MG-1 Frequency 60 Hz Voltage 460 V Number of poles 6 Degree of Protection IP55 Synchronous speed 1200 rpm Output rating 350 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC411 - TEFC