Baldor FDL3731M 5HP, 1740RPM, 1PH, 60HZ, 215, 3730LC, TEFC, F1 FAN AND BLOWER

Baldor FDL3731M 5HP, 1740RPM, 1PH, 60HZ, 215, 3730LC, TEFC, F1 FAN AND BLOWERSpecs Catalog Number FDL3731M Enclosure TEFC Frame 215 Frame Material Steel Frequency 60. 00 Hz Motor Letter Type Cap Start, Cap Run Output @ Frequency 5. 000 HP @ 60 HZ Phase 1 Synchronous Speed @ Frequency 1800 RPM @ 60 HZ Voltage @ Frequency 230. 0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals UR CSA Ambient Temperature 40 C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid

Frame 280S/M Output 75 HP (55 kW) Number of Poles 6 Frequency 50 Hz Rated speed 989 rpm Slip 1

allowing its use in applications where 1000:1 constant torque turndown ratio is required

lb Locked rotor torque 229 % Breakdown torque 250 % Locked rotor time 27s (cold) 15s (hot) Moment of inertia (J) 104 sq

59 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals UR CSA Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 4

00 % Rated voltage 400 V Rated current 3

758 LOCKED ROTOR TORQUE UOM OZFT INSULATION CLASS B LOCKED ROTOR AMPS 3

Model_Number 888949 PRODUCT NAME KIT

3 POLES 6 NUMBER SPEEDS 1 RPM 1190 RPM 2 1190 RPM 3 1185 RPM 4 985 RPM 5 985 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 VOLTS 3 208 VOLTS 4 400 VOLTS 5 200 FRME 365 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE CTE OPPOSITE END BEARING 6213-2Z-J/C3 SHAFT END BEARING 6313-2Z-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1

Frame 284T Output 20 HP (15 kW) Number of Poles 4 Frequency 50 Hz Rated speed 1473 rpm Slip 1

lb Locked rotor torque 340 % Breakdown torque 360 % Locked rotor time 37s (cold) 21s (hot) Moment of inertia (J) 0

875 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 885 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Drawings