7109 EPOXY - 1.25KG SET

7109 EPOXY - 1.25KG SETAn epoxy system for all types of expensive marble other than white. 1kg of resin and 250gm of hardener. Description Suitable for all coloured marbles, excellent in crack & pin holes filling, gives very high gloss. Method of Application Grind the surface to grit 100 and leave them to dry for 16 20 hours so that absolutely no traces of water are found on the surface especially on cracks. Mix resin and hardener in the ratio 4: 1 by a weight and apply the

Country of Origin India Color – Resin (A part) / Hardener (B part) Clear / Clear Form - Resin / Hardener Liquid / Liquid Ratio 4:1 Resin 4 part Hardener 1 part Viscosity at 25°C (in cps) Low Gel time at 20°C 20-25 minutes Drying time 45°C 4-5 hours Polishing of surface After 24 hours Unit pack 1kg of resin and 250gm of hardener Category Crack filling epoxy for light and dark colour marble

according to the desired effect

Sand if necessary for better adhesion

terrazzo and other stones

Cleaning Compatibility Suitable for Floor Buffers & Polishers Surface Type Works on Tile

Clean the surface before treatment by using diluted ‘R155 Intensive Cleaner’

professional-grade powder designed to restore and enhance the shine of granite surfaces

This makes it resistant to stains

White colour pad for cleaning the floor

Thoroughly clean area with clean water

gives very high gloss

stiff brush or a suitable pad