Bando P30-S14M-120 STS MPB TB Pulley ESWX SERIESBando P30 S14M 120 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). An Explanation of Synchro Link Drive Pitches With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental
5KW VOLTS 230/460 AMPS 24/12 R
BM3112 SPEC
lb Locked rotor torque 260 % Breakdown torque 310 % Locked rotor time 27s (cold) 15s (hot) Moment of inertia (J) 0
895 LOCKED ROTOR TORQUE UOM OZFT INSULATION CLASS B LOCKED ROTOR AMPS 5
Bando - 12-3V495 To resolve problem applications where belts are flipping over or jumping out of the sheaves
44 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
8A HD Amps 60s 36A Communication Module NOT APPLICABLE Accessories/Optionals Pump Genius Memory Stick Maximum Ambient Temperature 50°C(122°F) Frame Size B Weight 9
Catalog Number EM2333T Enclosure TEFC Frame 254T Frame Material Iron Frequency 60
6 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class B Inverter Code Not Inverter KVA Code L Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3420M Mounting Arrangement F1 Number of Poles 2 Overall Length 12
3 POLES 4 NUMBER SPEEDS 1 RPM 1770 HERTZ 60 VOLTS PRIMARY 200 VOLTS 200 FRME 324 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE D OPPOSITE END BEARING 6211-2Z-J/C3 SHAFT END BEARING 6311-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1 STARTCAPMFD N\A SHIPPING WEIGHT 420 BREAKDOWN TORQUE 188 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 145 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER D LOCKED ROTOR AMPS 619 NEMA NOMINAL EFFICIENCY 92
Frame 445/7T Output 150 HP (110 kW) Number of Poles 6 Frequency 50 Hz Rated speed 985 rpm Slip 1
Power supply 200-240 V Input phases Three-phase Rated current (ND) 2
