Magigoo Original, glue stick Content:120ml

Magigoo Original, glue stick Content:120mlMagigoo Original is an easy to use 3D printing adhesive designed to address 'the first layer not sticking problem' for general purpose filaments. Magigoo ensures a strong adhesion to the hot build plate. But the magic starts when printing is ready: just wait for the plate to cool down and then remove your prints with just a finger flick! In addition, Magigoo helps to prevent warping. Regardless of you being a hobbyist or professional it is extremely

24 g/cm³ ISO 1183-3 Tensile  strength (at 23°C/50% rh) 130 MPa ISO 527 Elongation at maximum force 2 %

PETG (Polyethylene Terepthalate Glycol-modified) Filament

@1 mm/min)

Ultem and PPSU and their carbon/glass fibre reinforced counterparts

Description Value Printer nozzle temperature 390 - 440°C Heated bed temperature 120°C Print Speed 15-30 mm/s Bed Adhesion Magigoo HT on glass or a PEI Sheet

Description Value Printer nozzle temperature 355 - 390°C Heated bed temperature 120 - 160°C Adhesion Magigoo HT on glass or a PEI Sheet Drying recommendations 120°C

@1 mm/min) 3

ensuring flawless prints with high mechanical strength and excellent electrical insulation properties

The substance is not classified as dangerous according to Regulation (EC) no 1272/2008 (CLP/GHS)

200h) 180  °C /

Magigoo helps to prevent warping

20 g/cm3 ISO 1183-3 Tensile  strength (at 23°C/50% rh) 85 MPa ISO 527 Elongation (at 23°C/50% rh) 3