Gyuto / Damascus 255mm Honesuki

Gyuto / Damascus 255mm HonesukiThis Damascus Gyuto feature a long and thin blade, good distal taper, and thin tip. Flat profile with a slight curve toward the tip. The San mai is made from 135Cr3 steel core with random damascus (pattern welded) cladding. Full convex geometry the blade is etched. Specs : Blade length : 255mm Blade height at heel : 52mm Hagane : 135Cr3 Jigane : Pattern welded (15N20 with 1070) Handle : Wa (Octogonal), with Bog Oak (5500y o) Balance point : Pinch grip

The handle is made with Pear

Skiving knife 90x20mm

with Thuja burl

balance point at the touch mark

Very flat profil with the edge of the knife kissing the cutting board on 3/4 of the blade length

This suminagashi Sujihiki feature a long and shallow blade

- Blade length : 167mm

- Blade height at heel : 55mm- Hagane : 115CrV3- Jigane : Wrought iron (Scotland)

com/collections/petty

The handle is made with Turkish Walnut

Forged to shape and to geometry the bevels are free of low spot and finish on Kasfly (sanding paper)

Kurouchi finish with flat grind