Bando P80-14M-40 HT QD Timing Belt Pulley (E) 15mm WideBando P80 14M 40 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
125 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1180 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T3 Drawings
Model_Number M055ABU1150015B PRODUCT NAME 1 HP - - 1250 PHASETYPE 1_PHASE HORSEPOWER 1 POLES 10 NUMBER SPEEDS 1 RPM 1250 HERTZ 60 VOLTS PRIMARY 115/208-230 VOLTS 115 VOLTS 2 208 VOLTS 3 230 FRME 48 SHAFT CODE Y STACK 1
Model_Number GA66 PRODUCT NAME 29
SHUNT Heater Indicator No Heater Insulation Class F Lifting Lugs Standard Lifting Lugs Mounting Arrangement F3 Overall Length 23
7344 ohms Armature Inductance 6
97 LB-FT Pull-Up Torque 2
8 POLES 4 NUMBER SPEEDS 1 RPM 1780 RPM 2 1780 HERTZ 60 VOLTS PRIMARY 200/400 VOLTS 400 VOLTS 2 200 FRME 324 SHAFT CODE TS MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE FD OPPOSITE END BEARING 6211-2Z-J/C3 SHAFT END BEARING 6311-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1
6 lb Efficiency
Catalog Number CSWDM3538 Enclosure TENV Frame 56C Frame Material Stainless Steel Frequency 60
35AA001Z674G1 HP 1/
6 a Frame Prefix FL Heater Indicator No Heater Insulation Class H IP Rating NONE Mounting Arrangement F3 Overall Length 41
15 SHIPPING WEIGHT 27 BREAKDOWN TORQUE 165
