Bando 400-S8M-4400 C-X Ceptor TB ADDITIONAL PARTSBando 400 S8M 4400 C X High torque power transmission : Ceptor X provides higher torque and higher power transmission than normal trapezoidal teeth due to the mesh theory of the unique curvilinear teeth and has achieved high torque and high power transmission by using high rigidity and high elasticity components. Although it varies depending on the field, it has a 2. 7 fold or more transmission capacity compared to normal STS. Low noise : As the belt
6x(Code F) No load current 125 A Rated torque 1330 ft
0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals UR CSA Ambient Temperature 65 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 6
3 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty IP Rating NONE KVA Code J Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 2700 rpm Motor Lead Termination Flying Leads Motor Type 0632M Mounting Arrangement F1 Number of Poles 4 Overall Length 18
8 POLES 2 NUMBER SPEEDS 1 RPM 3450 RPM 2 2850 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 208-230/460 & 190/380 V VOLTS 208 VOLTS 2 230 VOLTS 3 460 VOLTS 4 190 VOLTS 5 380 FRME 56 SHAFT CODE C STATOR DIAMETER 5
23 IN Power Factor 77 Product Family Dirty Duty Plus Pulley End Bearing Type Sealed Bearing Pulley Face Code C-Face Pulley Shaft Indicator Standard Rodent Screen None RoHS Status ROHS COMPLIANT Service Factor 1
45 SHIPPING WEIGHT 23 THERMAL PROTECTION AUTOMATIC RESET BREAKDOWN TORQUE 54
Rated current 50 A / (AC-6b - T = 55°C) 60 A Reference CWMC Main contact 3 NO Control voltage 208V 50Hz/240V 60Hz(0
96 FULL LOAD AMPS PRIMARY 8
125 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1750 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 Automatic Thermal Overload Winding Thermal 1 Location KO Winding Thermal 2 None Drawings
33 VOLTS 115/230 AMP 6/3 RPM 1725 FRAME 56J SER
M1554T SPEC
Standard NEMA MG-1 Frequency 60//50 Hz Voltage 230/460//380 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 1 HP Mounting W-6 Flange C Terminal box¹ Left position Enclosure IC411 - TEFC
