Bando 2-7MS1120 Banflex Combo PUSHBUTTONS AND PILOT LIGHTS DEVICESBando 2 7MS1120 Ideally suited for short center distances and small diameter pulleys, BanFlex Combos banded construction minimizes or eliminates the turnover problem normally associated with small cross section belts. The ribbed construction provides superior flexibility while maintaining lateral stability. Precision molded, seamless polyurethane ribs provide maximum resistance to oil and traditional lubricants with virtually vibration free operation.
2 million Degree of protection IP (IEC 60529) - Main circuit IP10 Degree of protection IP (IEC 60529) - Control circuit IP20 Rated current 80 A Rated current In - AC-4 32 A Rated operational Current Ie AC-1 (¿ = 55 ºC) 110 A Rated operational voltage Ue - IEC 60947-4-1 1000 V Rated operational voltage Ue - UL/CSA 600 V Height 115 mm (4
0 V Design Code C Drip Cover No Drip Cover Duty Rating CONT Efficiency @ 100% Load 91
GemlineGDP2522
36-0000-0439 CAT
15 STARTCAPMFD N\A SHIPPING WEIGHT 175 BREAKDOWN TORQUE 292 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 173 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER G LOCKED ROTOR AMPS 79
Standard NEMA MG-1 Frequency 60//50 Hz Voltage 230/460//380 V Number of poles 2 Degree of Protection IP55 Synchronous speed 3600 rpm Output rating 40 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC411 - TEFC
04 IN Power Factor 86 Product Family Other Pulley End Bearing Type Ball Pulley Face Code Standard Service Factor 1
lb Locked rotor torque 229 % Breakdown torque 260 % Locked rotor time 37s (cold) 21s (hot) Moment of inertia (J) 13
Rheem51-20684-01
8 a Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter IP Rating NONE KVA Code L Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 18 AWG Motor Type 3517M Mounting Arrangement F1 Number of Poles 4 6 Overall Length 12
Bando - TL32H100 The type of pulley used on a Synchro-Link® drive depends on a number of factors
0 V @ 60 HZ Agency Approvals CULUS CSA EEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 54
