Fasco A252 Round Outlet Permanent Split Capacitor Draft Inducer Blower, 115 Volts, Flange: No THREE-PHASE CAPACITOR BANKS

Fasco A252 Round Outlet Permanent Split Capacitor Draft Inducer Blower, 115 Volts, Flange: No THREE-PHASE CAPACITOR BANKSOEM Direct Replacement Draft Inducer Blower 3. 3" Diameter Permanent Split Capacitor (PSC); Capacitor Required: 5 Mfd 370 Volts (Supplied with Blower) Thermally Protected Open Air Over Class B Insulation, 40C Ambient Ball Bearing 8" Leads with Pin Terminal Housing Additional Information Motor TypePermanent Split Capacitor Thermal ProtectionThermally Speed3200 2800 rpm Current0. 65 0. 30 A Number of Speeds2 Ambient Temperature40 C ULYes Insulation

0 a Frame Prefix FL Heater Indicator No Heater Insulation Class H Mounting Arrangement F3 Overall Length 47

0 a Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code G Lifting Lugs Standard Lifting Lugs Motor Lead Quantity/Wire Size 3 @ 1 AWG Motor Type A44076M Mounting Arrangement F1 Number of Poles 4 Overall Length 44

CDRX14124T-5 HP 1 VOLTS 575 AMPS 1

1 FULL LOAD AMPS PRIMARY 94/47 SERVICE FACTOR AMPS PRIMARY 108/54 Technical Data

31 IN Power Factor 71 Product Family General Purpose Pulley End Bearing Type Sealed Bearing Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None RoHS Status ROHS COMPLIANT Service Factor 1

lb Locked rotor torque 260 % Breakdown torque 300 % Locked rotor time 10s (cold) 6s (hot) Moment of inertia (J) 0

STAMPED MN416A01 TAG-INSTAL-MAINT no wire (2100bx)4/22

Load 74° C Start Configuration DOL Break-Down Torque 34

Load 68° C Start Configuration DOL Break-Down Torque 380 LB-FT Pull-Up Torque 194 LB-FT Locked-Rotor Torque 241 LB-FT Starting Current 401 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

30 A Rated torque 12

43 LB-FT Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

69 Technical Data