Bando 7M630 Banflex Contactors-2 PoleBando 7M630 The small cross section of the BanFlex belts makes them the preferred choice where short center distances and small diameter sheaves are required on compact equipment designs. The 60 sidewall angle and precision molded, seamless construction allows for precise belt to sheave meshing in high speed applications up to 10,000 RPM. Precision cast, seamless polyurethane body for maximum power transmission capability at high speeds. Polyester
Bando - 150-S8M-1648 HP Anticipating the demand for energy savings and higher horsepower transmission
90 A Rated torque 35
0 V @ 60 HZ Agency Approvals UR NEMA_PREMIUM NEMA PREMIUM CSA EEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 114
0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code G Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 10 AWG Motor Type 4052M Mounting Arrangement F1 Number of Poles 4 Overall Length 24
GoodmanB1401015S
9 POLES 2 NUMBER SPEEDS 1 RPM 3530 HERTZ 60 VOLTS PRIMARY 575 VOLTS 575 FRME 256 SHAFT CODE TC MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE UTE OPPOSITE END BEARING 6207-2Z-J/C3 SHAFT END BEARING 6309-2Z-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1
37 BREAKDOWN TORQUE UOM OZFT LOCKED ROTOR TORQUE 12
875 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1755 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
Reference RW27 Number of poles 2 poles Mounting type Direct Contactor model CWM9-40 Current range 4-6
Standard NEMA MG-1 Frequency 60 Hz Voltage 460 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 3 HP Mounting F-1 Flange C Terminal box¹ Left position Enclosure IC411 - TEFC
US Motors2108
35Z413G004G1 HP 1 VOLTS 230/460 AMPS 3
