MACC Semi-Synthetic Cutting Fluid 5 Litre

MACC Semi-Synthetic Cutting Fluid 5 LitreMF 5LITRE MACC Semi Synthetic Cutting Fluid 5 Litre Water mix cutting fluid designed for use with mostcoldsaws bandsaws & metal working machinery that use arecirculating coolant system with fluid storage tank. Resistant to bacterial & fungal growth extending fluidservice life. Provides an excellent surface finish & extends blade life Contains corrosion inhibitors to protect machine partsand workpiece Mix 1 part fluid to 8 parts water

M7-SG501 | M7 Air Grease Gun Continuous Style

Specifications• Morse Taper Outside: 3• Morse Taper Inside: 2• Overall Length: 112 mm• Sleeve type: A Grade• Material: Case Hardened Steel• Surface finish - External taper: Ground• Surface finish - Internal taper: Ground• Body hardness: 54-58 HRC• Tang hardness: 54-58 HRC

Can also be used onthe side and upside down

1 (28mm) slots in the tabletop allow forinsertion of clamps to reach any point on the table

5mm 10C116-9 16mm 2

The machine’s forward & reverse work modes withvariable speed adjustment allows thread cutting up to M20 ofthrough holes and blind holes

BC69|Champion 2in x 1/2in Bolt And Nut (C) - GR5

**BULK FILL ONLY**

• Equipped with self storing lever bar

SPECIFICATIONS• Square Drive: 1/2• Bolt Capacity: 9/16 (14mm)• Torque Range: 50-150 ft-lb / 68-203 Nm• Max Torque at 5 seconds: 250 ft-lb / 339 Nm• Free Speed: 7500 RPM• Air Requirement: 2

C2035-13 | Champion 1-5/16in Imperial External Circlip -10pk

• Drive: 1• Diameter: 50mm• Depth: 31mm• Overall Length: 70mm