From the Anvil Ball Mortice/Rim Knob Set FINISH:Polished Nickel

From the Anvil Ball Mortice/Rim Knob Set FINISH:Polished NickelFrom the Anvil Ball Mortice Rim Knob Set These knobs come unsprung. They are solid cast, not hollow, roses are attached so use in conjunction with a mortice latch or lock. The knobs are surface fixed and for best results the centre of the knob should be a minimum of 3" from the edge of the door. Heavy Duty latches 4" or 5" are recommended for maximum efficiency. Supplied with necessary fixing screws. DIMENSIONS: 45mm Knob Diameter 72mm Projection 60mm

140mm Long

Fixing Plate: 91mm x 36mm x 3mm

Backplate Size: 75mm x 61mm

are hollow and have loose roses to enable them to be used with a rim lock (discard one rose) or use with a mortice lock - For more information see our guide to locks & latches here

From the Anvil Cast Peardrop Fastener

6mm Fixing Plate Thickness

63mm Fixing Plate Height

93mm Handle Length

Receiver Plate: 35mm x 20mm x 3mm

Length 473mm/448mm centres

To restrict the latch bar movement a screw-on staple pin is provided

which is designed with an extra long backplate to be used with all multi point locks