Genteq 3731HS HEAT SHIELD® Condenser Fan Motor, 3/4 HP, 1 Ph, 60 Hz, 208-230 V, 1075 RPM, 1 Speed, 48 Frame, TEAO TEAO CAST IRON

Genteq 3731HS HEAT SHIELD® Condenser Fan Motor, 3/4 HP, 1 Ph, 60 Hz, 208-230 V, 1075 RPM, 1 Speed, 48 Frame, TEAO TEAO CAST IRONHeat Shield Condenser Fan Motor 5. 6" Diameter 48 Frame Permanent Split Capacitor (PSC); Capacitor Required: 15 Mfd 370 Volts (Not Supplied with Motor) Thermally Protected Totally Enclosed Air Over Class B Insulation, 70C Ambient Sleeve Bearing 1 2" Diameter Shaft with Double Flat 48" Leads Extended Clampbolts, Mounting Holes in shell, Belly Band Mount (Belly Band Not Included) Additional Information Thermal ProtectionThermally Protected Speed1075 rpm

D XP Division Division I Agency Approvals UL CSA CCSAUSEEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Constant Torque Speed Range 6-60 Current @ Voltage 174

36G687S658G1 HP 3 VOLTS 230/460 AMPS 8

875 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1160 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T4 Drawings

3 POLES 6 NUMBER SPEEDS 3 RPM 1075 HERTZ 60 VOLTS PRIMARY 115 V VOLTS 115 FRME 42 SHAFT CODE Y STATOR DIAMETER 4

Type Kit Applied product CFW11 CFW11M Description Communication module Complement PROFDP-05 Application Variable speed drive Certification CE

83 % Rated voltage 460 V Rated current 477 A L

9 RPM 3450 FRAME 184C SER

Terminal line reference Without reference Accessory description Isulation cover TI Supplement for accessories for terminal block line For standard screw type terminal BTWP Nominal section of borne cable 95 mm² Color component for terminal block Grey Max

A44-8406-5175 ROTOR BARS 58 GREASE POLYREX EM Performance

0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready IP Rating NONE KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 8 AWG Motor Type 4060M Mounting Arrangement F1 Number of Poles 4 Overall Length 29

5 PF 75 RATING 40C AMB-CONT DE BRG 6203 ENCL TEFC BLANK SFA 2

493 Line Amps 9