Monkey Stuff - Wet Trimmer Foot Beading Tool WT2 Glaze Line_Mayco (FN) Foundations Matte

Monkey Stuff - Wet Trimmer Foot Beading Tool WT2 Glaze Line_Mayco (FN) Foundations MatteThe Monkey Stuff Foot Beading Tools are wet trimmers designed to add a small rounded bead feature to the bases of pots before the pot is removed from the wheel. The WT2 trimmer has a 3 16 radius and is suitable for smaller pieces like bud vases, mugs, and small bowls. The WT3 trimmer has a radius and is suitable for larger pieces. Why add a bead to the foot of a wet pot? This can be a nice way to add a decorative foot to your pieces in a way that

Weight: 77 lbs (35 kg)

Dinnerware Safety: Beads is not recommended for dinnerware due to surface texture

they do offer greater sensitivity to temperature change and so may be appropriate in applications that are below about 2200°F and require sensitivity (glass is a good example)

208V 1/3PH – Top/Bottom

These 480 Volt kilns are c-MET-us listed to UL499 standards if the NEMA 1 panel is ordered

Skutt Part Number / KPS Part Number

Do your pigments contain lead compounds

make sure you use this to reduce the glare of a glossy glaze

Also makes a great home studio kiln for all of your ceramic needs

Mayco’s Fundamentals - developed by our ceramic engineer

High Temp Brick: The kiln base is lined with 2

Cone 5 = 1184 °C (at 150°C/hour for the final 100°C of firing) / 2201°F ( at 270°F/hour in the final 200°F of firing)