Bando TL34-S8M-60 STS TL Timing Belt Pulley (1610) HYDROWASHBando TL34 S8M 60 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
lb Locked rotor torque 200 % Breakdown torque 240 % Locked rotor time 36s (cold) 20s (hot) Moment of inertia (J) 114 sq
46 LOCKED ROTOR TORQUE UOM OZFT KVA CODE LETTER G LOCKED ROTOR AMPS 49
Model FHP5X-UBW400 Application Molded-case circuit breaker Product line UBW400 Type Flange Shaft type Flexible Shaft/cable length 5' Degree of protection NEMA 4/4X Color Black
0 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code G Lifting Lugs No Lifting Lugs Motor Lead Quantity/Wire Size 6 @ 2/0 AWG Motor Type A44112M Mounting Arrangement F1 Number of Poles 2 Overall Length 49
G XP Division Division I Agency Approvals CSA CSA EEV UR Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Constant Torque Speed Range 6 Current @ Voltage 9
weight³ 578 lb Efficiency
Flange Size D-254 Sealing Type Taconite Labyrinth Bearing Size Bearing 205 Products Line W22 IEEE 841 Downloads
Standard NEMA MG-1 Frequency 60 Hz Voltage 460 V Number of poles 2 Degree of Protection IP23 Synchronous speed 3600 rpm Output rating 125 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC01 - ODP Electric Motors
Frame 404/5JP Output 75 HP (55 kW) Number of Poles 2 Frequency 50 Hz Rated speed 2965 rpm Slip 1
1x(Code H) No load current 43
4 LB-FT Starting Current 262 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
Ribs/Teeth/Angle148
