Bando P18L075 JA QD Timing Belt Pulley (JA) 13mm WideBando P18L075 JA The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
Rated current 12 A Reference CWC0 Main contact 3 NO Control voltage 24V DC Terminal type Screw Attributes
Bando - 150-S5M-420 HP Anticipating the demand for energy savings and higher horsepower transmission
5 FULL LOAD AMPS PRIMARY 240 Technical Data
15 STARTCAPMFD 590 SHIPPING WEIGHT 32 THERMAL PROTECTION MANUAL RESET BREAKDOWN TORQUE 141
Frame 286HP Output 30 HP (22 kW) Number of Poles 2 Frequency 50 Hz Rated speed 2910 rpm Slip 3
00 NEMA-NOM-EFF 90
125 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 3465 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
2 POLES 6 NUMBER SPEEDS 1 RPM 1185 RPM 2 1185 RPM 3 1175 RPM 4 980 RPM 5 980 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 VOLTS 3 208 VOLTS 4 400 VOLTS 5 200 FRME 284 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE TCE OPPOSITE END BEARING 6210-J/C3 SHAFT END BEARING 6310-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1
15 STARTCAPMFD N\A SHIPPING WEIGHT 270 BREAKDOWN TORQUE 264 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 206 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER G LOCKED ROTOR AMPS 151
0 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code G Lifting Lugs Standard Lifting Lugs Motor Lead Quantity/Wire Size 3 @ 2 AWG Motor Type A40064M Mounting Arrangement F2 Number of Poles 4 Overall Length 38
Series GPH2 Panel type SOFT-STARTER Horsepower (HP) 150 HP Enclosure type Wall mount Thermal Managment None General enclosure options None Main voltage 460 V Control Voltage 120 V Frequency 60 Hz SCCR rating 5 kAIC Disconnect switch type Circuit Breaker rotary handle disconnect Bypass type AC3 Control power transformer 100 VA - Open Reactor/Filter None Communication None Control options Start Pushbutton
0 V Duty Rating CONT Enclosure Modification FORCE VENT Feedback Device NO FEEDBACK High Voltage Full Load Amps 180
