Bando 1930V950 Power Max Variable Speed Severe Duty MotorsBando 1930V950 Power Max Variable Speed Belts extreme crosswise rigidity As Power Max belts are wide in proportion to their thickness, they must have extreme crosswise rigidity to keep them from dishing in. This dishing would cause the tensile cords to become misaligned, leading to uneven speed control and excessive wear on the cords, causing premature failure. Power Max belts provide lengthwise flexibility to bend around small sheave diameters
Bando - 410H300G The extra durable
lb Locked rotor torque 290 % Breakdown torque 320 % Locked rotor time 37s (cold) 21s (hot) Moment of inertia (J) 91
8 LB-FT Locked-Rotor Torque 80 LB-FT Starting Current 223 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
Flange Size FC-355 Sealing Type Not Applicable Bearing Size Bearing 319 Products Line W22 IEEE 841 Downloads
02 IN Power Factor 72 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code C-Face Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1
Bando - A50KC Ultrapower AG€ž KC is constructed specifically for those drives where a clutching function is essential to successful operation
5 a Heater Indicator No Heater Insulation Class F IP Rating NONE KVA Code J Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Termination Flying Leads Motor Type 3540L Mounting Arrangement F1 Number of Poles 2 Overall Length 17
6 POLES 2 NUMBER SPEEDS 1 RPM 3450 HERTZ 60 VOLTS PRIMARY 208-230 V VOLTS 208 VOLTS 2 230 FRME 56 SHAFT CODE C STATOR DIAMETER 6
500 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible: Connected Standard Shaft Slinger Indicator No Slinger Speed 1725 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 Automatic Thermal Overload Winding Thermal 1 Location SB Winding Thermal 2 None Drawings
8 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3530M Mounting Arrangement F1 Number of Poles 2 Overall Length 13
2 POLES 4 NUMBER SPEEDS 1 RPM 1770 HERTZ 60 VOLTS PRIMARY 200 VOLTS 200 FRME 182 SHAFT CODE JM MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE DE4 OPPOSITE END BEARING 6206-2Z-J/C3 SHAFT END BEARING 6207-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1
4 FULL LOAD AMPS PRIMARY 18
